Flipper; Figure 9 Front Side Of Flipper; Figure 10 Rear Side Of Flipper - idp Smart-70 User Manual

1.2.4 Flipper

SMART-70 Flipper can flip over a card for dual sided printing and laminating. The error card bin in
Flipper can collect 30 error cards (encoding failed cards) and the collected cards can be taken out
by opening the front cover of Flipper.
1
2
3
1
2 3 4 2
① Physical Lock
② Flipper cover
③ Indicator LED
④ Card gate
4

Figure 9 Front side of Flipper

① Kensington lock
② Communication port
③ Power port
④ Power switch

Figure 10 Rear side of Flipper

Physical lock is to lock Flipper cover.
To take out error cards or fix problem, please
open Flipper cover by pulling out.
The status of Flipper is displayed by the color.
Card gate is to convey cards from module to
module.
Kensington lock is usable.
To communicate between SMART-70 modules,
please connect to an adjacent module.
Please connect the 24V DC power adaptor
provided with Flipper.
Turn On/Off
20