Fujitsu PRIMERGY CX120 S1 Service Supplement Manual page 15

V
CAUTION!
Only install system expansions that satisfy the requirements and
rules governing safety and electromagnetic compatibility and those
relating to telecommunication terminals. If you install other
expansions, they may damage the system or violate the safety
regulations. Information on which system expansions are approved
for installation can be obtained from our customer service center or
your sales outlet.
The PRIMERGY CX120 S1 server may only be opened by
authorized, qualified service personnel.
The warranty is void if the server is damaged during installation or
replacement of system expansions.
Before installing/removing internal options to/from the server, turn off
the server, all peripheral devices, and any other connected devices.
Do not damage or modify internal cables or devices. Doing so may
cause a device failure, fire, or electric shock.
Devices inside the server remain hot after shutdown. Wait for a while
after shutdown before installing or removing internal options.
The circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Before handling them, first
touch a metal part of the server to discharge static electricity from
your body.
Do not touch the circuitry on boards or soldered parts. Hold the
metallic areas or the edges of the circuit boards.
Install the screw removed during installation/detaching Internal
Options in former device/position. To use a screw of the different kind
causes a breakdown of equipment.
The installation indicated on this note is sometimes changed to the
kind of possible options without notice.
PRIMERGY CX120 S1
Service Supplement
Safety notes
13