V80 Vario Unit Features; Interfaces; Internal Options - LXNAV LX90 Series User Manual

Gps-navigation system with variometer
Hide thumbs Also See for LX90 Series:
Table of Contents

Advertisement

Rev #23
TE compensation can be selected to be either pneumatic TE probe or digital compensation.
2.1.4

V80 Vario Unit Features

3.5'' (8.8 cm) sunlight readable screen with 1200nits.
QVGA (320*240pixels) sunlight readable display.
ARM Cortex-M4 processor running on 160MHz.
Digital temperature compensated pressure sensors for altitude and airspeed
inertial platform 3 axis digital +-6g accelerometer, 4 gyroscopes (for inertial vario, AHRS
and wind calculation).
Smooth audio output with audio equalizer and many custom audio settings.
Integrated synthesized speech output.
Audible thermal assistant.
External SD card for configuration, FlarmNet and firmware update.
Push buttons for setting adjustments.
ALS (ambient light sensor).
Additional Flarm radar screen and artificial horizon (optional).
Three buttons for toggling between screen and target selection.
Digital temperature compensated pressure sensors for altitude and airspeed.
100Hz sampling rate for very fast response.
Speed to fly indication.
TE compensation can be selected to be either pneumatic TE probe or digital compensation.
2.1.5

Interfaces

The RS232 interface has NMEA output for external devices.
An SD Card interface.
A USB slot for data transfer using USB memory stick.
2.1.6

Internal Options

A FLARM module can be built into the main display unit. All necessary connectors are
available on the rear side of the unit (FLARM external indicator, FLARM antenna), which
guaranties the same comfort as with the original FLARM devices. It is very important to
point out that the whole system uses only one GPS receiver and therefore offers a low
power solution.
An Artificial horizon can be enabled on main display unit.
constantly using data from the inertial platform in order to make the vario signal smoother,
however if pilot would like to see the artificial horizon an additional software option to do so
must be purchased.
Version 7.10
Page 13 of 224
December 2019
The Vario sensor box is

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx80 seriesLx8080Lx8000Lx9050Lx9000Lx9070

Table of Contents