Position Report; Satellite Sky View - LXNAV LX90 Series User Manual

Gps-navigation system with variometer
Hide thumbs Also See for LX90 Series:
Table of Contents

Advertisement

Rev #23
5.2.2

Position Report

This page shows your position report relative to an arbitrary selectable point. Use this page
when you are talking to ATC.
Press the REPORT button to select a report point. Radials will always be magnetic, and
distance will always be in nautical miles. If you press the MARK button a new waypoint will
be created.
Radial in position report page is based on magnetic compass reading and NOT
true compass reading.
5.2.3

Satellite Sky View

Information about tracked satellites is given on this page. If no satellite information is
available a message
Green satellites are satellites currently being used for position determination.
concentric circles represent satellite elevation (0, 30, 60 degrees above horizon).
satellite is in the centre of the circles it is directly overhead.
When you are experiencing bad satellite reception, check this page. If the satellites are
always red in a particular place, you should consider moving the GPS antenna to another
position. If you press the MARK button a new waypoint will be created.
"No satellite info"
is displayed.
Version 7.10
December 2019
Three
If a

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx80 seriesLx8080Lx8000Lx9050Lx9000Lx9070

Table of Contents