Ibm System Ds8000 Adapter As Sra Type - IBM DS8000 User Manual

Figure 35. IBM System DS8000 Adapter as SRA type
Note: IBM DS8000 SRA works with only one of the HMCs (in dual HMC
environments).
7. Enter the name of the local DS8000 and select IBM System DS8000 Adapter
as SRA type, then click Next.
8. Enter the array manager information in the Add Array Manager panel.
First Management IP Address/Hostname
Enter the IP address of the protected (primary) site DS8000 device's
Hardware Management Console (HMC). For example,
192.168.15.3
The address can either be an IP address or a fully-qualified domain
name.
Second Management IP Address/Hostname
Enter the IP address of the recovery (secondary) site array's HMC. For
example,
192.168.17.2
The address can either be an IP address or a fully-qualified domain
name.
Name Filter
Enter a comma-separated list of volume names or session ID prefixes
for a specific discovery (for example, cnLun,10,usLun). Leave the
parameter empty for full discovery.
45
Chapter 5. Usage