Array Manager Information - IBM DS8000 User Manual

Note:
v Use \ to represent the comma in the volume name or session id. For example,
v For more information, see "Filtering volumes by name" on page 48.
Note: The user name and password for protected and recovery site DS8000
device's HMC must be the same.
10. Click Next. SRM discovers the DS8000 device at the specified IP address.
11. Click Finish.
Figure 36. Array Manager information
12. Select the remote site on the Inventory window and click Add Array
46
IBM DS8000 Storage Replication Adapter
cnLun\10\usLun.
User name
Enter the user name that is configured for DS8000 device's HMC.
Password
Enter the password for the DS8000 device's HMC.
9. Enter the connection information for the array.
Manager.