Adding Array Managers For M-N Metro Mirror - IBM DS8000 User Manual

Table 1. Arguments for RegPeerArray (continued)
Argument
RegPeerArray <delete>
You can access help by using the RegPeerArray keyword without any argument.
For example:
C:\>java -cp DS8K_Java_Client.jar RegPeerArray
Adding Array Managers for M–N Metro Mirror
If you use M–N Metro Mirror when adding array managers, enter the IP addresses
for the DS8000s in a specific order.
Because you can have more than one recovery (secondary) DS8000 with the same
protected (primary) DS8000, you must enter the array manager information
carefully.
First Management IP Address/Hostname
Second Management IP Address/Hostname
26
IBM DS8000 Storage Replication Adapter
Use after RegPeerArray to:
Remove a peer array.
For example:
C:\>java -cp DS8K_Java_Client.jar
RegPeerArray delete IBM.2107-498264895736/192.168.1.1
Enter the IP address of the protected site DS8000 device's Hardware
Management Console (HMC). For example,
192.168.1.1
The address can either be an IP address or a fully qualified domain name.
Enter the IP address of the recovery site array's HMC. For example,
192.168.1.3
The address can either be an IP address or a fully-qualified domain name.