Setting Up Non-Preconfigured Environments For Metro-Global Mirror - IBM DS8000 User Manual

Register intermediate DS8000
1. In the open command-line prompt, change the current directory to an SRA
installation directory. For example: C:\>cd "\Program Files\VMware\VMware
vCenter Site Recovery Manager\storage\sra\IBM DS8000\"
2. Issue the following example command to register the intermediate site DS8000:
jre\bin\java.exe -cp lib\DS8K_Java_Client.jar
RegInterSite 9.11.108.28 dsuser dspassword IBM.2107-75H0301 add
Where dsuser is the username and dspassword is the password. The output that
is returned appears similar to the following example output:
Add 9.11.108.28 successfully. Pre-Configured is set to false.
Note: SRA supports only a non-preconfigured setting for Metro-Global Mirror. So,
the command shows that "Pre-Configured" is being set to false. If you are using
the preconfigured setting on the storage system, clear the setting.
Unregister intermediate DS8000
To remove intermediate site information, issue the following example command
from the SRA installation directory:
jre\bin\java.exe -cp lib\DS8K_Java_Client.jar RegInterSite delete
The output that is returned appears similar to the following example output:
Delete 9.11.108.28 successfully.
Show help information
To show the help menu, issue the following command from the SRA installation
directory:
jre\bin\java.exe -cp lib\DS8K_Java_Client.jar RegInterSite
The output that is returned appears similar to the following example output:
Usage:
RegInterSite [HMC IP Address] [HMC username] [HMC password] [Machine Serial] add
RegInterSite delete
Setting up non-preconfigured environments for Metro-Global
Mirror
Configure non-preconfigured environments for Metro-Global Mirroring.
Procedure
Complete the following steps to set up non-preconfigured environments for
Metro-Global Mirror:
1. Click IBMDS8000SRAUtil.exe to set up SRA configurations for Metro-Global
Mirror (see Figure 22 on page 30).
29
Chapter 4. Configuration