Setting Up Preconfigured Environments For Metro Mirror And Global Mirror; Pre-Configured Option - IBM DS8000 User Manual

"Setting user privileges for SRA configurations" on page 39
Setting the user privileges for SRA differs, depending on whether you have a
preconfigured environment or a non-preconfigured environment.
Setting up preconfigured environments for Metro Mirror and
Global Mirror
If the Pre-Configured option is checked, some configuration is needed before SRA
can function properly.
Procedure
Double-click the IBMDS8000Util.exe shortcut on the desktop to access the SRM
Configuration Utility (see Figure 18).
1. Check the Pre-Configured option.
Figure 18. Pre-Configured option
Note:
v The Test ExtPool ID (Px), Backup Target Volume, Backup ExtPool ID (Px), and
v The DS8000 Command Timeout (sec) option determines how long you want the
2. Select the Support Relationship Type according to the user requirement.
3. Check TPC-R if you use SRA integrated with Tivoli Storage Productivity Center
4. Click OK to confirm the new selections or click Cancel to leave the selections
22
IBM DS8000 Storage Replication Adapter
SpaceEfficient Mode options are unavailable if the Pre-Configured option is
checked.
process to run.
for Replication.
unchanged. To confirm or change the options, restart the configuration utility
by double-clicking the shortcut. The current selections are shown.