Verifying The Vmware Vcenter Srm Installation - IBM DS8000 User Manual

Note: Set HostType to VMWare when you configure host connect on DS8000. For
example:
mkhostconnect -wwname 12341234000A000F -hosttype VMWare host_1_port_1
Attention: Confirm with your storage administrator that all the requirements are
met.

Verifying the VMware vCenter SRM installation

Before you install the IBM DS8000 SRA, ensure that the VMware SRM is installed.
The VMware SRM must be accessible at the protected (primary) and recovery
(secondary) sites.
About this task
The following procedure includes steps and screen captures that apply when using
VMware vSphere Client. If you are using VMware vSphere Web Client, similar
steps are applicable, except the step of logging in to vSphere Client.
Procedure
1. Log in to VMware vSphere Client.
2. Go to the home page and confirm that the Site Recovery icon is displayed
4
IBM DS8000 Storage Replication Adapter
under "Solutions and Applications."