2.4.4 Log in to the Configuration Home Page
1. Open your browser to the Office Ringer IP address.
Note
Note
Note
Note
2. When prompted, use the following default Web Access Username and Web Access
Operations Guide
If the network does not have access to a DHCP server, the device will default to an IP
address of 10.10.10.10.
Make sure that the PC is on the same IP network as the Office Ringer.
You may also download CyberData's VoIP Discovery Utility program which allows you to
easily find and configure the default web address of the CyberData VoIP products.
CyberData's VoIP Discovery Utility program is available at the following website address:
https://www.cyberdata.net/pages/discovery
The Intercom ships in DHCP mode. To get to the Home page, use the discovery utility to
scan for the device on the network and open your browser from there.
Password to access the Home Page
Web Access Username: admin
Web Access Password: admin
Installing the Singlewire InformaCast Office Ringer
Connecting an Auxiliary RGB Strobe to the Device
(Figure
2-19):
931645A
CyberData Corporation
28
Need help?
Do you have a question about the 011311 and is the answer not in the manual?
Questions and answers