Boiler Hydraulic Diagram - LAMINOX Idro TERMOBOILER Mini Series Instructions For Installation, Use And Maintenance Manual

5.5

Boiler hydraulic diagram

1. Cleaning Gear motor
2. Cockpit sensor holder
3. Expansion tank
4. Vacuum thermostat 10/20 Pa
5. Vacuum thermostat 30/50 Pa
6. External sensor clamp
7. Manual reset
8. Serial port
9. Main switch
10. Power socket
11. System delivery
12. System return
13. Vent safety
14. Primary air inlet
15. In/Out aux
16. Flue gas motor
17. In/Out aux
18. Magnesium anode
19. Jolly valve
Caution: to prevent the heating system from having to be regularly cleaned it is best to install a
magnetic sludge remover, this filter aids routine maintenance, increases boiler life span, aid
removal of impurities and increased global efficiency of the system.
The magnetic sludge remover filters the heating system removing sludge, ferrous or sandy
residues which circulate in the pipes, if not removed they create surfaces which do not permit heat
transmission, consequent pellet consumption and possible boiler malfunction.
21