Setting Up; Sim Installation - AMPLIFIED ENGINEERING fatbox G3 Manual

SETTING UP

2. 1

SIM INSTALLATION

WHAT YOU'LL NEED
1
3G Data Enabled micro SIM
Card
2
PC/Laptop with an
Ethernet port
3
SIM card network details –
APN/USERNAME/PASSWORD.
You would need to get this
information from
your operator.
INSERTING THE SIM
CARD
Dismantle the casing cover and slide out the PCB. Avoid touching the electronics, handle the board by the edges.
STEP 1 of 6 -
Insert your micro SIM card into the SIM card slot. Push the metal latch left/right to lock/unlock.
STEP 2 of 6 -
Reassemble the metal casing.
STEP 3 of 6 - Connect the power adapter/antenna and plug the Ethernet cable to your pc.
STEP 4 of 6 - Power up the FATBOX G3.
(SIM card's
orientation
fits as shown)
fatbox G3