Lan Ethernet - AMPLIFIED ENGINEERING fatbox G3 Manual

WEB
MANAGEMENT
FATBOX_G3
MENU OPTIONS
3. 2

LAN ETHERNET

Quick Start
LAN Settings
WiFi & BT Settings
WAN Settings
Port Forwarding
Dynamic DNS
IPsec VPN
Port Settings
IoT Hardware
IoT Client
SNMP
Management
System Status
Logout
LAN Port Settings
ETH0 IP Address
192.168.1.1
ETH0 Netmask
255.255.255.0
DHCP Enable Enabled
DHCP Start
100
DHCP Limit
150
ETH1 IP Address 10.1.1.1
ETH1 Netmask
255.255.255.0
ETH1 Gateway
Advanced Settings
LAN Masquerade Disabled
Specific LAN device Masquerade (eth0)
ETH0 MAC Spoofing
1c:bd:0e:00:00:01
ETH1 MAC Spoofing
1c:bd:0e:00:00:01
UPDATE
e.g.xxx.xxx.xxxStart
Limit no.ofIPstoassign
For EthernetWANOption
xx.xx.xx.xx.xx.xx/xxx
xx.xx.xx.xx.xx.xx
xx.xx.xx.xx.xx.xx
fatbox G3
Sets the IP address of LAN port on FATBOX
G3
Setup the FATBOX G3 to automatically
assign IP addresses to your connected LAN
devices.
This would be the starting address for con-
nected devices. For the example above, the
first device connected would be assigned
192.168.1.100.
This would be the limit for number of con-
nected devices. For the example above, the
last device connected would be assigned
192.168.1.150
This is to enable/disable masquerade
IP masquerading allows internal machines
that don't have an officially assigned IP ad-
dresses to communicate to other networks
and especially the Internet. Set this to the
specific device on your network.
Sets the ETH0 MAC address of the FATBOX
G3
Sets the ETH1 MAC address of the FATBOX
G3