SAFETY OF USE
ALL CONDITIONS
!
POWER SETUP
SIM CARD
CONFIGURING THE
ROUTER
All specialist electronic devices must be operated with due care to avoid damage or injuries and should be installed and
operated by a trained personnel.
DO NOT OPERATE THIS EQUIPMENT IN ENVIRONMENTS CONTAINING POTENTIALLY EXPLOSIVE GASES OR
LIQUIDS, EXAMPLE, GAS STATIONS AND CHEMICAL PLANTS AND EXPLOSIVE STORES.
Inadequate current or dips in voltage may cause the device to fail to connect to data services even if the LEDs are
lighted up. Supply over 30 VDC will damage the device.
Never remove or insert SIM card when device has PWR switched in "ON" position. Damage caused to device or SIM in
such case will not be warranted.
Do not reboot/power-down the device until the writing process is acknowledged as completed.
fatbox G3
Need help?
Do you have a question about the fatbox G3 and is the answer not in the manual?