AMPLIFIED ENGINEERING fatbox G3 Manual page 23

WEB
MANAGEMENT
FATBOX_G3
MENU OPTIONS
3. 12
MANAGEMENT
Quick Start
LAN Settings
WiFi & BT Settings
WAN Settings
Port Forwarding
Note that from the internet,
Dynamic DNS
the FATBOX can only be
IPsec VPN
Port Settings
accessed via HTTPS (secure)
IoT Hardware
to ensure all data between
IoT Client
user and FATBOX web
SNMP
configuration page is
Management
encrypted.
System Status
Logout
We give our clients the
choice to install their own
signed certificate (e.g. Veri-
sign or Digicert) via SSH to
FATBOX console. Since there
is no packaged signed SSL
certificate in each FATBOX,
a complaint of error might
be issued from the browser.
Note that this does not affect
the secure encryption of
data to configure the FATBOX
via HTTPS.
System Management
System Hostname
fatbox
Web Login Username
********
Enable https access from WAN
Enabled
Enable Secure Shell (SSH)
Enabled
Enable Log
Disabled
Enable Signal LEDs
Disabled
System Time reference ntp
UPDATE
Set RTC using current system time
Set Up RTC (hardware clock)
Password Management
Current Password
********
New Password
********
Reconfirm New Password ********
Change Password
fatbox G3
Enter your system hostname if necessary
This login name is only used for web. SSH
always login as root
Enable or disable remote https access via WAN
port 443. Do note that non secure https access
via WAN is not allowed.
Disabled by default. If enabled, will provide
root accessusing the Password above.
If enabled, you can download/ view the log
page fromtheʻSystemStatusʼ page.
EnablesSignal LEDs.
Note: They must be set toʻ0ʼ if AT - over-
Ethernet isenabled.
Choose a system time source reference as ntp
(online time server) or rtc (on-board battery-
backed hardware clock).
Click to update hardware clock using current
time system.
Please do not use default password for your
deployed unit. Change it to a default
password.
Passwords are never stored directly but as a
hash string to increase device security.