AMPLIFIED ENGINEERING fatbox G3 Manual page 25

WEB
MANAGEMENT
FATBOX_G3
MENU OPTIONS
3. 12
MANAGEMENT
Quick Start
LAN Settings
WiFi & BT Settings
WAN Settings
Port Forwarding
Dynamic DNS
IPsec VPN
Port Settings
IoT Hardware
IoT Client
SNMP
Management
System Status
Logout
OTA Firmware Updating
Over the air updating gives ease
of management to add new
firmware patches without
physically accessing the box.
Asset configuration updates can
also be made remotely via the
<IOT Hardware> tab.
System Management
Firmware Update:: Please check with support@amplified.com.au
UPDATE FIRMWARE
System Recovery Management
FACTORY SETTINGS REBOOT SYSTEM
fatbox G3
Ensure that the gateway HTTPS console must
be accessible before proceeding with this
steps.
1. Click on the 'UPDATE FIRMWARE' button.
2. In the new window, click on 'CHOOSE FILE'
and select from your local folder the specific
firmware update .zip file. (Please check with
support@amplified.com.au for any
assistance).
3. Click 'UPLOAD FIRMWARE FILE'. If the
firmware has been successful you will get the
following message:
"RESULT: The firmware update has been
applied"
4. After closing the page, you will need to log
in again for security purposes.
If the update failed, check that the connection
to the gateway is stable. Or else please
contact support@amplified.com.au
Click 'Reboot' to soft reset the
FATBOX
device.
Cick 'Factory Settings' to revert all
parameters to factory default.