Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Aeotec Manuals
  4. Switch
  5. Smart Switch 7
  6. User manual

Aeotec Smart Switch 7 User Manual

Hide thumbs Also See for Smart Switch 7:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
25.11.2019
Smart Switch 7 user guide.
Modified on: Wed, 13 Nov, 2019 at 10:45 PM
Aeotec Smart Switch 7.
Aeotec Smart Switch 7
SmartStart, S2 framework, and Z-Wave Plus
(https://aeotec.com/z-wave-s2)
To see whether Smart Switch 7 is known to be compatible with your Z-Wave system or not, please reference our Z-Wave
gateway comparison
(http://aeotec.com/z-wave-gateways)
(https://aeotec.freshdesk.com/solution/articles/6000219912-smart-switch-7-technical-specification-)
Get to Know your Smart Switch.
Button Presses and LED reaction.
Button Press
Function when released.
1. (Unpaired from the
network).
Power On
-
2. (Paired into the network).
QR Code Scan
Pairs into Z-Wave network.
https://aeotec.freshdesk.com/support/solutions/articles/6000219911-smart-switch-7-user-guide-
(http://aeotec.com/z-wave-plug-in-switch)
(http://aeotec.com/z-wave-plus)
technology.
Smart Switch 7 user guide : Aeotec Group
(SS7) has been crafted to power connected lighting using
. It is powered by Aeotec's S2
listing. The technical specifications of Smart Switch 7
LED Reaction
1. Blue LED is flashing.
-
2. LED follows the state of load
(configurable).
Blue LED fast blink during pairing,
then solid blue LED for 2 seconds
to indicate successful pair.
can be viewed at that link.
1/8

Advertisement

loading
Need help?

Need help?

Do you have a question about the Smart Switch 7 and is the answer not in the manual?

Questions and answers

Related Manuals for Aeotec Smart Switch 7

Summary of Contents for Aeotec Smart Switch 7

  • Page 1 . It is powered by Aeotec’s S2 (http://aeotec.com/z-wave-plus) technology. (https://aeotec.com/z-wave-s2) To see whether Smart Switch 7 is known to be compatible with your Z-Wave system or not, please reference our Z-Wave gateway comparison listing. The technical specifications of Smart Switch 7 (http://aeotec.com/z-wave-gateways) can be viewed at that link.

  • Page 2: Important Safety Information

    Important safety information. Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.

  • Page 3: Quick Start

    2. Power your Smart Switch 7 to any outlet; its LED will flash blue and is ready to pair. 3. Click the Action Button 2 times within 3 second on Smart Switch 7 to pair it. After frist click the LED will change to red, after second click the LED change to orange.
  • Page 4 2. The LED indicator will fade its blue light in and out slowly, which indicates the reset operation is successful. Configurations. Parameter 4 - Overload threshold. If power exceeds the value set in this parameter for over 1 minute, Smart Switch 7 will report and overload report and turn off Smart Switch 7. Size = 2 Byte...
  • Page 5 For example: Value = 0 + 256 + 512 + 1024 = 1792 0 = sets the control scheme to turn on Smart Switch 7 when open alarm state happens 256 = allows Smoke Alarm signals to control SS7 512 = allows CO Alarm signals to control SS7 1024 = allows CO2 Alarm signals to control SS7 Parameter 10 - Release/Disable alarm.
  • Page 6 Parameter 80 - Status Update. Keeps the status of Smart Switch 7 in sync with your Z-Wave gateway. Determine which reports are sent to your gateway upon a state change (ie. If switch turns ON, then the switch will forward state update to Z-Wave gateway).
  • Page 7 25.11.2019 Smart Switch 7 user guide : Aeotec Group Byte value = 0x(Value 1)(Value 2)(Value 3)(Value 4) Suggestion - use a "hexadecimal to decimal converter" that can be easily found on google. For example: If you want to set Night Light Mode to be enabled at 19:00 at night and disable at 07:30 in the morning, you just need to configure: Value1=0x13, Value2=0x00, Value3=0x07, Value4=0x1E.
  • Page 8 2592000 Parameter 255 - Factory reset. This value can only be configured to reset default values of Smart Switch 7 parameter settings. This can also be used to factory reset and remove it from your Z-Wave network. Size = 4 Byte...

This manual is also suitable for:

Zw175-aZw175-b