Advertisement
Step 9
Slide Back Panel (P12) into the grooves as shown.
Step 10
You will need
6 x Big Cam
Flat head
Nut (H2)
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
www.fantasticfurniture.com.au
(P3)
(P3)
(P2)
(P5)
Position Top Panel (P1) onto Side Panels (P3) & (P4),
Divider Panel (P5) and Back Panels (P12).
Insert 6 x Big Cam Nuts (H2) into Side Panel (P3) & (P4),
Divider Panel (P5) and turn clockwise to lock.
(P4)
(P4)
PAGE 9
Advertisement
