Advertisement
Step 5
You will need
2 x Screw
Allen Key
(H3)
(H12)
Position Bottom Panel (P2) on its edge with
its groove nearer to the floor.
Position the Divider Panel (P5) onto the
Bottom Panel (P2), with its bare edge facing
downward, and its cam nut holes are furthest
away from the Bottom Panel.
Fix Divider Panel (P5) to Bottom Panel (P2)
with 2 Screws (H3) using Allen Key (H12).
Step 6
You will need
4 x Cam
Flat head
Nut (H2)
screwdriver
Position Left Side Panel (P3) and Right Side Panel (P4) onto Bottom Panel (P2), so that their grooves are aligned.
Insert 4 x Big Cam Nuts (H2) into Bottom Panels (P2) and turn clockwise to lock.
www.fantasticfurniture.com.au
(P2)
(P2)
(P4)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
PAGE 7
Advertisement
