Speakman SB-1041 Instructions

INSTRUCTIONS FOR MODELS
SB-1041
For additional assistance or service please contact:
SPEAKMAN
®
Company
400 Anchor Mill Road
New Castle, DE 19720
800-537-2107
customerservice@speakman.com
www.speakman.com
92-SB-1041-03
5
If water supply is 1/2" Compression, use the
provided adapter and 1/2" IPS faucet
Connections (not supplied) ❶ or use the supplied
coupling nuts ❸ with 3/8" O.D. ball nose risers
(not supplied) ❷. Use wrenches to tighten
connections. Do not over-tighten.
INLET SUPPLIES NOT INCLUDED
TOOLS AND SUPPLIES
Adjustable
Wrench
HELPFUL TOOLS & SUPPLIES:
11mm Safety Plumber's
Wrench Glasses Putty

IMPORTANT

• Do not over-tighten any connections or damage
may occur.
• Be sure to read instructions thoroughly before
beginning installation.
• This faucet has an operating range of 20-80 psi.

SAFETY TIPS

Cover your drain to prevent loss of parts. Be sure to
wear eye protection while cutting pipe.

MAINTENANCE

Your new Speakman Product is designed for years of
trouble-free performance. Keep it looking new by
cleaning it periodically with a soft cloth. The use of harsh
chemicals and abrasives may damage the finish and
void the product warranty. Please be sure to only use
approved cleaners. Please contact Speakman for any
clarification of acceptable cleaners.

WARRANTY

Warranty information can be found at:
www.speakman.com
6
Remove Aerator from faucet.
1
Place Rubber Gasket over Hoses and align to
base of Faucet.
3
From below, install Rubber Washer (1), Metal
Washer (2), and secure with Mounting Nut (3).
Align Faucet to desired position and wrench
tighten Mounting Nut (3).
OR
7
Turn on water supplies. Activate faucet and flush
both HOT and COLD water for 1 minute.
2
Place Hoses, one at a time, thru hole in
mounting surface. Lower Faucet into position.
4
Make connections to water supplies. The inlet
threads of the faucet are 9/16"-24 UNF and
will accept a 3/8" Compression Fitting.
Wrench Tighten.
Accepts a 3/8"
Compression
Fitting
SUPPLY STOPS NOT INCLUDED
8
Turn OFF faucet and re-install Aerator. Hand
Tighten.