Assigning Snmp Community Names And Access Levels - Paradyne FrameSaver SLV 9124 Technical Reference

Assigning SNMP Community Names and Access Levels

"
9124-A2-GH30-00
The General SNMP Options screen provides the configuration options that allow
the FrameSaver unit to be managed by an SNMP manager supporting the SNMP
protocol. Use this screen to:
H
Assign the SNMP community names that are allowed to access the
FrameSaver unit's Management Information Base (MIB).
H
Specify the type of access allowed for each SNMP community name.
Whenever an external SNMP manager attempts to access an object in the MIB,
the community name must be supplied.
Procedure
To assign SNMP community names and access levels:
1. Follow this menu selection sequence:
Main Menu → Configuration → Management and Communication →
General SNMP Management
The General SNMP Management Options screen appears.
2. Select and set the following configuration options, as appropriate.
To . . .
Assign SNMP community names
Assign the type of access allowed
for the SNMP community names
3. Save your changes.
See Configuring SNMP Management
more information about General SNMP Management configuration options.
June 1999 - Preliminary
Set the configuration option . . .
Community Name 1 and Community Name 2
to a community name text, up to 255
characters in length.
Name 1 Access and Name 2 Access to Read
or Read/Write.
in Chapter 8, Configuration Options, for
Security
9-7