Table of Contents
Advertisement
Security
Assigning SNMP Community Names and Access Levels
6-6
Refer to
Setting Up for SNMP Management
information about SNMP configuration options.
The General SNMP Options screen provides the configuration options that allow
the T1 access unit to be managed by an SNMP manager supporting the SNMP
protocol. Use this screen to:
Assign the SNMP community names that are allowed to access the unit's
Management Information Base (MIB).
Specify the type of access allowed for each SNMP community name.
NOTE:
Community names are case-sensitive.
Procedure
To assign SNMP community names and access levels:
1. Follow this menu selection sequence:
Main Menu
Configuration
2. Select the desired configuration area and press Return.
Load Configuration From
Customer Configuration 1/Customer Configuration 2]
3. Follow this menu selection sequence, pressing Return after each selection:
Configuration Edit/Display
Communication
The General SNMP Management Options screen appears.
4. Select and set the following configuration options, as appropriate.
To . . .
Enable SNMP management for the
access unit
Assign SNMP community names
Assign the type of access allowed for
the SNMP community names
in Chapter 5, Setting Up , for more
[Current Configuration/
Management and
General SNMP Management
Set the configuration option . . .
SNMP Management to Enable.
Community Name 1 and Community
Name 2 to a community name text up to
255 characters in length.
Name 1 Access and Name 2 Access to
Read or Read/Write.
April 1998
9161-A2-GH30-30
Advertisement
Table of Contents
