Dynamic Frame Relay Interface Alarm Defaults - Paradyne FrameSaver SLV 9124 Technical Reference

SNMP MIBs and Traps, and RMON Alarm Defaults

Dynamic Frame Relay Interface Alarm Defaults

Table D-3. Dynamic Frame Relay Interface Alarm Defaults
Sample
Item
Type
Rx Utilization D
Tx Utilization D
1
D = Delta. Indicates that the calculated difference between the current value and the previous value is contained
in the MIB.
2
I in the OID = Interface ID of the frame relay link.
C-16
These alarms apply to the FrameSaver unit's frame relay interfaces. They are
created during RMON initialization, and will change if the interface's line speed
changes.
2
1
MIB/Tag/OID
MIB: MIB II (RFC 1573)
Tag: ifInOctets
OID: .1.3.6.1.2.1.2.2.1.10.I
MIB: MIB II (RFC 1573)
Tag: ifOutOctets
OID: .1.3.6.1.2.1.2.2.1.16.I
June 1999 - Preliminary
Rising
Threshold
Event
Interval Default
Type
60 secs Rising 70% of link
(1 min) capability
60 secs Rising 70% of link
(1 min) capability
Falling
Threshold
Default
65% of link
capability
65% of link
capability
9124-A2-GH30-00