Turn Bluetooth On Or Off - Cisco 8841 User Manual

These hands-free features apply to Bluetooth wireless headsets that are used with the Cisco IP
Phone 8851:
•
Answer a call
•
End a call
•
Change the headset volume for a call
•
Redial
•
Caller ID
•
Divert
•
Hold and Accept
•
Release and Accept
Hands-free devices have different feature activation methods. Device manufacturers may also
use different terms when referring to the same feature.
Important: Only one headset type works at any given time. If you use
both a Bluetooth headset and an analog headset that are attached to
the phone, enabling the Bluetooth headset disables the analog
headset. To enable the analog headset, disable the Bluetooth headset.
Plugging a USB headset into a phone that has Bluetooth headset
enabled disables both the Bluetooth and analog headset. If you unplug
the USB headset, you can either enable the Bluetooth headset or
disable the Bluetooth headset to use the analog headset.
For information about how to use your Bluetooth wireless headset, see the User Guide provided
with your headset.

Turn Bluetooth On or Off

When Bluetooth is active, the Bluetooth icon
2. From your desk phone, press the Applications button
3. Select Bluetooth.
4. Press On or Off.
5. Select Set.
Add a Bluetooth Headset
Make your Bluetooth headset discoverable.
1. From your desk phone, press the Applications button
2. Select Bluetooth > Devices.
3. Select Scan.
4. Select your headset and press Connect.
Cisco IP Phone 8841/8851 Multiplatform Phones User Guide
appears in the phone screen header.
Bluetooth Wireless Headsets
.
.
71