120' Booms - Raven ISO AutoBoom Case IH 3230 Installation Manual

C 5
HAPTER
1. Remove the nuts from the right wheel axle (P/N 063-0131-585).
2. Place the wheel (P/N 322-0131-008) on the right wheel axle.
3. Align and place the hub retainer bracket (P/N 107-0171-617) over the wheel.
4. Reinstall the lug nuts on the wheel axle to secure the wheel and hub retainer bracket.
5. Mount the right wheel receiver bracket (P/N 116-0159-601) to the front of the right boom using two 1-5/16" W x
2" L x 3/8" thread U-bolts (P/N 107-0171-612), two 2-1/16" W x 3" L x 3/8" thread U-bolts (P/N 107-0171-609),
and eight 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).
6. Insert the right wheel axle into the right wheel receiver bracket, positioning it so that the bottom of the wheel
touches the ground (or nearly so) and the wheel faces away from the machine.
7. Secure the gauge wheel assembly in the wheel mounting bracket by installing two 1/2"-13 x 1-1/2" SS hex bolts
(P/N 311-0052-186) and two 1/2"-13 zinc hex nuts (P/N 312-1000-043).
8. Repeat the steps above to install the left wheel.

120' BOOMS

NOTE: The appearance of the wheel axles may vary.
FIGURE 2. Gauge Wheel Installed
1. Remove the nuts from the wheel axle (P/N 063-0131-567).
2. Remove the hub retainer bracket from the wheel axle.
3. Place the wheel (P/N 322-0131-008) on the wheel axle.
4. Align and place the hub retainer bracket over the wheel.
5. Reinstall the lug nuts on the wheel axle to secure the wheel and hub retainer bracket.
6. Mount the receiver bracket (P/N 116-0159-680) to the front of the left boom using four 2-1/16" W x 3" L x 3/8"
thread U-bolts (P/N 107-0171-609) and eight 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).
7. Insert the wheel axle into the receiver bracket, positioning it so that the bottom of the wheel touches the
ground (or nearly so) and the wheel faces away from the machine.
8. Secure the gauge wheel assembly in the wheel mounting bracket by installing two 1/2"-13 x 1-1/2" SS hex bolts
(P/N 311-0058-186) and two 1/2"-13 zinc hex nuts (P/N 312-1001-043).
9. Repeat the steps above to install the right wheel.
26
ISO AutoBoom® Installation Manual for Case IH 3230, 3240, 3320, 3330, 3340, 4420, 4430, & 4440 (MY2010 &