Download Print this page

Bestop Tigertop Installation Instructions And Owner's Manual page 12

Top kit with and without soft doors for toyota land cruiser, fj40, 1964 - 1984
Hide thumbs Also See for Tigertop:

Advertisement

Side Curtains
The small Front Side Curtain may be left in the down position while the Rear Side Curtain
is in the up position. To roll up the Side Curtains, fold the bottom rear corner of the panel
forward and roll the curtain to the outside. Avoid wrinkles in the fabric and the windows.
Secure the curtain in place with the curtain straps inside the top (see Figure 13).
Folding the Top Down
Step One
Unsnap the Rear and Side Curtains and unzip the Rear Curtain zippers.
Fold the Side Curtains along the seam and up over the top. Fold the
Rear Curtain up over the Side Curtains. Unfasten the hook and loop
fasteners around the Vertical Retainer and the Horizontal Rod. Release
the locking tabs on the bow releases from the holes in the Front Bow
and slide the Rear Bow down to the Bow Mounts. Insert the bow
release tab into the hole on the Front Bow, just above the Bow Mount.
Remove the Vertical Retainer and the Horizontal Rod from their
mounts and pivot the Front Bow to the rear of the vehicle until it
makes contact with the Rear Bow (see Figure 14).
Step Two
Unfasten the top from the Windshield Retainer and lay the top down on
the body (see Figure 15). Fold the top in half from front to back and
continue folding until the top is about one foot wide at the rear of the
vehicle (see Figure 16). The Buckle Strap assemblies may be used to
secure the top to the bow assembly.
Step Three
Secure the Vertical Retainers and the Horizontal Rods by snapping
each of the Bow Tie Down Straps to a body stud. Secure the rear
portion of the bow assemblies by snapping each of the Bow Tie Down
Straps to a corner body stud.
Figure 13
Figure 16
Figure 14
Generic Vehicle Shown
Figure 15
Rev. C 0301
Second
Fold
First Fold
51440/51443
12

Advertisement

loading

This manual is also suitable for:

5144351440