Bestop TrekStep Side-Mount Installation Instructions

Toyota tundra crewmax - passenger side 5.5' bed 2007 - current

Installation Instructions

TrekStep Side–Mount™

www.bestop.com

- We're here to help! Visit our web site and click on

INSTALLATION TIME

1 Hour

TOOLS

17 mm,

13 mm

14 mm

SKILL LEVEL

1 - Easy

4 mm,

5 mm

Vehicle Application

• Toyota Tundra Crewmax - Passenger Side

5.5' Bed

2007 – Current

Part Number: 75412-15

"Ask a

Question". Click here for more

Truck Accessories by Bestop.

Table of Contents

Do you have a question about the TrekStep Side-Mount and is the answer not in the manual?

Page 1: Installation Instructions
TrekStep Side–Mount™ Part Number: 75412-15 www.bestop.com - We’re here to help! Visit our web site and click on “Ask a Question”. Click here for more Truck Accessories by Bestop. INSTALLATION TIME SKILL LEVEL 1 Hour 1 - Easy TOOLS 17 mm,...
Page 2 TrekStep Side-Mount™ – Installation Instructions Parts List and Hardware Identiﬁ cation Remove Bolt Remove the rear bolt on the rear cab body mount M6 Flat Washer, with a 14mm open end wrench. Save the screw. Part Number 481.96, Qty - 1...
Page 3 TrekStep Side-Mount™ – Installation Instructions Rear Cab Body Install Mounting Bracket Assemble Side Bracket Mount Screw Hole Locate the slot in the frame below the front Position the two Side Brackets back to back as bed body mount. Slide the top hole of the shown.
Page 4 TrekStep Side-Mount™ – Installation Instructions Install Step Install Linkage Mounting Bracket Use the M6-1.0 x 20 Socket Head Cap Screws to Put a drop of Loctite on the threads of the mount the Step to the Linkage Assembly. two (2) M10-1.5 X 45mm Hex Head Screws.
Page 5: Operation
TrekStep Side-Mount™ – Installation Instructions Operation Care and Maintenance • The TrekStep™ is foot operated and deploys and retracts with a The step pad surface and linkage arms should be washed with mild soap and nudge of your foot. water using a soft brush or sponge to dislodge any mud, dirt or accumulated road grime.