Cascaded Installation - Tripp Lite B132-004 Owner's Manual

Cascaded Installation

Source PC
You can expand the number of connected computers to 13 (12 remote, 1
local) by cascading B132-004's together. Follow the instructions below to set
up a Cascaded Installation. Note: A B132-004-RB VGA Over Cat5 Extender/
Splitter Rackmount Bracket (sold separately) is recommended for rackmount
installations. The B132-004-RB is designed to comfortably fit 3 of the B132-
004 Local Units in 1U of rack space. If you are using a B132-004-RB, attach
all of the B132-004 Local Units to the bracket before continuing.
1 Connect your computer to the Source port on the first B132-004 in the
installation using a VGA cable.
2 Using the 1 ft VGA cable provided with the B132-004, connect the VGA
Output port on the first B132-004 in the installation to the VGA Input
port on the second B132-004 in the installation. Repeat this step if you
are connecting a third B132-004 Local Unit.
3 Connect the power supplies to all B132-004s in the installation and plug
them into an appropriate power source.
Local PC
(Optional)
5