Factory Setup Reset; To Perform A Factory Reset - Solid State Logic ORIGIN User Manual

Appendix B

Factory Setup Reset

Factory reset is provided to restore the console to its default settings and conditions.
Factory reset affects:
Routing (all routes cleared)
-
Comms settings (Monitor Dim assignments, Talk All assignments)
-
Autosleep state
-
Any Setting
-
Monitor and Source Selection
-

To perform a Factory Reset:

Power up the console (either from off or from Sleep state)
Press and hold PEAK MODE SELECT + DIM MON METERS switches during and for the duration of the meter start-up sequence
which happens during power up.
Red Peak LEDs on every meter will start flashing which means that the Factory Reset has been performed.
Release the switches -> console restarts with settings back to Factory Default.
40
ORIGIN User Guide