Alt 3/Headphone Selection Setup; Automatic Incremental Routing Setup - Solid State Logic ORIGIN User Manual

ALT 3/Headphone Selection Setup

The ALT 3/Headphone Monitor Output key can be setup to intercancel with the other three Monitor Outputs (Main, ALT 1, ALT
2), rather than be an independent selection. This is another setting accessed with a simultaneous press of the SHIFT and AUTO
SLEEP keys to access the setup menu, and with the Bus 5 key/LED selecting and showing the status as per the table below.
Bus LED
5

independent of Main/ALT 1/ALT 2 monitor selection. (Default)
ALT 3/

intercancels with Main/ALT 1/ALT 2 monitor selection.
ALT 3/

Automatic Incremental Routing Setup

This Setup option controls the behaviour of the Automatic Incremental Routing feature (See page 37). This is another setting
accessed with a simultaneous press of the SHIFT and AUTO SLEEP keys to access the setup menu, and with the Bus 6 key/LED
selecting and showing the status as per the table below.
Bus LED
6
Channel number dictates the automatic bus assignment (e.g. Ch9 ->Bus 9, Ch10 -> Bus 10). (Default)
Lowest channel in selection goes to Bus 1, next channel to Bus 2, etc. (e.g. Ch9->Bus 1, Ch10-> Bus 2).
ORIGIN User Guide
Monitor Select Function
Monitor Select Function
Appendix B
39