Origin Master Section Detail; Stereo Returns - Solid State Logic ORIGIN User Manual

ORIGIN Master Section Detail

Stereo Returns

ORIGIN has four Stereo Returns for external stereo sources such as external effects or additional stereo
submixes.
ROUTE
The Stereo Groups are able to be routed to the Track Buses in pairs and the routing works in an identical
way to the Channel routing (for more details see page 12 or Appendix A). The ROUTED TO BUS LED
illuminates at half brightness when the return is routed to any of the sixteen buses.
TO F/BACK A
Feeds the Stereo Return signal to Foldback A. Typically this is used to add an external effect (such as
reverb) to an artists headphone feed.
TO F/BACK B
In the same way as the previous control, this feeds the Stereo Return signal to Foldback B.
LEVEL
Controls the amount of the Stereo Return to the main stereo Mix Bus (or AFL)
MIX - Routes the Stereo Return to the main stereo Mix Bus
AFL - Routes the Stereo Return to the After Fade Listen (AFL) bus (and forces the monitoring to AFL)
CUT - Mutes the Stereo Return signal to the main Stereo Mix Bus
Stereo Return
+
RETURN L
-
+
RETURN R
-
± 20dB
ORIGIN User Guide
TRIM
LEVEL
dB
dB
to 0dB
F/B 1
L R
FB 1
LEVEL
to 0dB to 0dB
FB 2
LEVEL
to 0dB
MIX AFL
L R
L R
L
CUT
MIX
AFL
F/B 2
L R
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1/2
R
3/4
5/6
7/8
9/10
11/12
13/14
15/16
Origin Master Section
BUSES 1 - 16
21