Operation - StarTech.com RK4OD User Manual

Insert two M5 x 12 mm Assembly Screws through the
7.
Front Base Bracket and into the Left Base Bracket. Tighten
the M5 x 12 mm Assembly Screws using a Phillips Head
Screwdriver.
Repeat step 7 for the Right Base Bracket.
8.

Operation

Arrange your Equipment in the Rack so that the heaviest
1.
Device is on the bottom of the Rack and the other Devices
are arranged in descending order of weight, with the lightest
Device installed at the top of the Rack.
Use the provided M5 x 16 mm Screws and M5 Cage Nuts to
2.
mount the Equipment into the Rack.
Caution! Do not move the Rack after the Equipment has
been mounted. Instead, remove the Equipment, relocate the
empty Rack, and then load the Equipment back into the
Rack.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4