Speaker Installation - Bogen NYQUIST NQ-S1810WT-G2 Installation Manual

Speaker Layout
Figure 2
ROOMS - In most cases, an environment, such as a classroom,
requires only a single wall baffle speaker to service the entire room. The
final placement of the speaker within the room can vary, but common
area locations such as at the head of the room or near the room entrance
aretypically chosen (see Figure 2). Based on the speaker position that
has been selected, you can choose between several mounting options
(see Figures 3-6).

Speaker Installation

Step 1
Select the mounting option from Figures 3–6 and use the appropriate
hardware for gang box mount or wall mount. Bogen provides the screws
and the washers for mounting on a standard electrical gang box, but
when mounting directly to a wall or other surface, you must supply the
appropriate hardware for the specific wall/surface construction type
(for example, concrete cinder block, metal beams etc.).
NOTE: Wall baffle speakers should be installed at a height of between 8 and
16 feet from the floor depending upon need.
Figure 3
(cont'd)
2X2 Wall Mount Box Mount
Figure 4
Side
View