Bogen NYQUIST NQ-S1810WT-G2 Installation Manual page 2

NQ-S1810WT-G2
Nyquist Gen-2 VoIP
Wall Baffle Speaker
Installation Manual
With the Nyquist Series Gen-2 VoIP Wall Baffle Speaker, there is no need
for external amplifiers, traditional intercom wiring, or transformer taps to
manually set or adjust. Connect the speaker via Cat5 to a Power-Over-Eth-
ernet (PoE) Switch or PoE Injector, and it is ready to use.
The speaker features an integrated 10 watt power amplifier, a CAN
Bus interface, a MEMS digital microphone for superior talkback audio,
and a Form C SPDT type 2-amp dry contact relay for controlling/over-
riding third-party devices like AV sources.
The speaker also allows DHCP deployment for easy installation. You can
let your Nyquist server automatically discover and configure your speaker,
or you can manually configure it through the speaker's web-based
user interface (web UI). The web UI also allows easy updating of
firmware and setting of parameters for Digital Signal Processing (DSP).
For more information about the web UI, refer to the Nyquist Gen-2 VoIP
Speakers Configuration Manual.