Indicator Status - NewLine PTC Series Quick Start Manual

CAUTION
When the machine enters sleep mode or is turned off, the system will first detect
●
whether the built-in computer is turned off. If not, it first turns off the computer and
then enters the sleep mode or shutdown.
Please shut down the machine before disconnecting the power source, or it may
●
damage the machine. Accidental power failure may damage to the machine.
Do not repeatedly turn the power on & off in a short period of time as it may cause
●
malfunction.

Indicator Status

Green flashes (every 2 seconds)
Green on, red flashes once every 3
Note
• When the machine is turned on, short press the power button on the front panel to enter
sleep mode; short press the power button on the front panel again, or press any button on
the remote control or tap the screen twice to wake up the screen.
• When the machine is turned on, press the "Lock screen" button on the remote control to lock
screen; press the "Lock screen" button on the remote control again, or short press the power
button on the front panel, or tap the screen three times in quick succession to resume the
touch control.
• When the machine is turned on, press the "Screen off" button on the remote control or hold
the screen for more than 3 seconds with 3 fingers to turn screen off; short press the power
button on the front panel, or press any button on the remote control or tap the screen to turn
screen on.
Indicator
Off
Red
Green
seconds
Machine status
Shut down or power disconnected
Screen off/normal working state
Sleep mode
Locked screen
19
Shutdown