Table of Contents
Advertisement
Built-in Computer Installation
WARNING
Do not perform the following on the built-in computer, or the product may be damaged or end up
being unusable!
Do not plug or unplug the built-in computer with the power connected. Please make
●
sure that the power has been turned off before plugging/unplugging.
Do not use the built-in computer before the screws have been tightened or if any
●
screws are missing.
Please install the built-in computer according to the following steps:
Step 1: (Optional) Unscrew the screws
by hand to remove the internal
PC shielding cover.
Note
This step is optional and applies to models
with shielding cover.
Step 3: Secure the built-in computer to the machine by using the screws.
Note
If the screen fuzzes, flashes or if no signal is received from the built-in computer channel after
turning on the power, it means that the built-in computer has not been properly installed. Please
check it and re-install.
Step 2: Push the built-in computer
horizontally into the
built-in computer port.
16
Advertisement
Table of Contents
