Table of Contents
Advertisement
GENERAL INFORMATION &
SPECIFICATIONS
Machine Orientation
General
Chassis
The chassis is an all steel construction, that is fully
welded for superior strength. The chassis is grit
blasted, primed and then protected by the Goldacres
paint process for excellent chemical resistance and
durability.
Paint Codes
Wheels:
Steel work:
Australian Standards AS2700
Tank
All tanks are constructed from UV resistant
polyethylene. Polyethylene tanks have a very high
chemical resistance. Due to the rotational moulding
process, there can be variance in the overall
dimensions of the tank which in turn results in
5-10% variation in the tank capacity. For this reason,
calibration markings should be used as a guide only.
Agitation
The Hydrojet agitator is located at the back of the
tank and is used to generate increased agitation
within the tank. The pressure line to the Hydrojet
agitator from the control manifold passes through a
nozzle and then through the barrel into the tank.
Prairie Compact 2000L Operator's Manual MY19 - REV 1
1
A
B
C
D
E
F
N23 Neutral Grey
G13 Dark Green
1
2
3
RIGHT HAND SIDE
LEFT HAND SIDE
Spray Controller
This sprayer comes with an in cabin switch box
controller for controlling up to 4 boom valves.
Boom Nozzle Control
3602
There are 4 motorised boom valves for control of
4589
boom section on/off function are fitted as standard.
These are mounted on the boom centre section at
the rear of the sprayer.
2
3
Filtration
Filtration is a critical part of the sprayer's
performance.
As standard, these sprayers are fitted with:
1 x Suction filter (50 mesh)
1 x Pressure filter (100 mesh)
Spray Pump
Fitted as standard on Goldacres equipment are Udor
positive displacement and oil backed diaphragm
pumps. The normal operating range is from 1 - 8 bar
which is sufficient for efficient nozzle performance.
A PTO drive is standard and a hydraulic drive is
optional.
Chapter 3
4
REV
MATERIAL
DRAWN BY:
UNLESS OTHERWISE SPECIFIED
:
MATERIAL <NOT
JAMES MARTIN
DIMENSIONS ARE IN MILLIMETRES
SPECIFIED>
27/07/2016
SURFACE FINISH:
MODEL EDITED BY:
UNLESS OTHERWISE SPECIFIED
JAMESMARTIN
-
18/12/2019
0.
± 1
ANGULAR ± 0.50°
WEIGHT:
DRAWING EDITED BY:
0.0
± 0.5
1392.21 KG
NEALHARVEY
0.00
± 0.25
20/12/2019
DRAWING CHECKED BY:
THIS DRAWING REMAINS THE PROPERTY
DEBURR AND BREAK
-
OF GOLDACRES TRADING PTY LTD AND IS
SHARP EDGES
-
SUBJECT OF COPYRIGHT
4
Continued over page
Chapter 3 - General Information & Specs - 7
5
6
REVISIONS
DESCRIPTION
DATE / INITIAL
2459
1-3 MORANG CR. MITCHELL PARK.
VICTORIA 3355 AUSTRALIA
PH: 03 5342 6399
TITLE:
LARGE FRAME PRAIRIE COMPACT, 2000L,
MY19
DRAWING NUMBER:
REV
01
GA6500020
SHEET 1 OF 1
DO NOT SCALE DRAWING
5
6
ECN
A
B
C
D
E
F
SHEET
A3
Advertisement
Table of Contents
