Table of Contents
Advertisement
General
Chemical Induction
The method of chemical induction into your sprayer
is dependent on the optional chemical induction
equipment fitted to your sprayer.
Goldacres chemical induction equipment available
includes:
• Chemical Probe
• Chemical Induction Hopper
Booms
This sprayer is typically mated with a 12m twin link
boom but other choices are available. See "Small
Booms 3-12m" operator's & parts
manual for details.
Nozzles
As information regarding nozzles is specific to those
being used in your application, no specific reference
is made to nozzle application rates or nozzle types in
this operator's manual. Goldacres suggest the use of
a current TeeJet or Lechler nozzle selection catalogue
for reference to nozzle sizes, outputs, spray patterns
and general spraying information.
For more technical information on the function of
spray nozzles and factors affecting their performance
you can also use the TeeJet 'User's guide to spray
nozzles'. The TeeJet & Lechler nozzle selection
catalogue and user's guides to spray nozzles are
available from your Goldacres dealer, or as a free
download from the TeeJet web site: www.teejet.com
Lechler web site: www.lechler.de
Machine Limitations
All Goldacres equipment is subject to operating
limitations, it is the operator's responsibility to
ensure that this equipment is being operated within
these limitations and appropriately to the operating
conditions at hand. Goldacres do not endorse
use of this machine for spraying at speeds greater
than 20 km/hr and should not be used in ambient
temperatures exceeding 40 degrees Celsius or
below 5 degrees Celsius.
8 - Chapter 3 - General Information & Specs
Custom Built Equipment
Where the owner of this sprayer has requested that
custom built equipment or options be fitted to this
sprayer it is necessary to understand that custom
fabrication and engineering is subject to many
variables. Goldacres cannot fully field test all custom
built options prior to despatch, and owners of new
sprayers fitted with custom built equipment or
options need to understand that the functionality of
these items may require refining in order to operate
as desired.
Hand Wash Tank
A fresh water hand wash tank is located on the left
hand side of the machine near the left hand access
ladder. It has a bottle with a hand pump that can be
filled with a liquid hand cleaner. The main tank can be
filled with fresh water for operator use.
Ladder
The ladders are to be used to access to the platform
and plumbing fittings on top of the tank. Always
face the ladder and retain three points of contact
with the ladder at all times when ascending and
descending. The ladders should be stowed while
the sprayer is operating to avoid personal injury or
equipment damage.
Hydraulics
The sprayer is supplied with one set of tractor
remotes for the boom lift function. The hydraulic
function is then controlled by your tractor.
Prairie Compact 2000L Operator's Manual MY19 - REV 1
Advertisement
Table of Contents
