Switch Assembly - Graco 16H960 Operation, Parts, Repair

Repair

Switch Assembly

Removal
1. Engage trigger lock and put prime/pressure relief
valve in UP position to relieve pressure.
ti19350a
2. Remove material cup and battery.
ti19360a
3. Remove pump module from drive module. See
Pump Module/Drive Module, page 31.
4. Remove four bolts (42) from motor housing.
42
3A2308A
5. Remove eight screws (43) from clamshell.
ti19347a
6. Remove trigger lock from assembly.
ti19617a
7. Remove trigger switch from clamshell and loosen
ti19636a
ti19637a
screws connecting wires to switch.
43
ti19649a
ti19650a
37