Graco 16H960 Operation, Parts, Repair page 40

2. If unit has accessible retaining bolt shown below,
proceed to step 3. If unit does not have accessible
retaining bolt, proceed to step 5.
3. Install new gear into drive housing. Screw retaining
bolt into drive housing to retain gear. Torque to 30
in-lb (3.4 N•m).
ti19857a
4. Install pump module to drive module. See Pump
Module/Drive Module, page 31.
40
ti19858a
ti19860a
ti19624a
5. Install new gear into drive housing. Pull the clam-
shell up and screw in retaining bolt to retain gear.
Torque to 30 in-lb (3.4 N•m).
ti19860a
ti19879a
6. Install two bolts connecting drive to clamshell.
Torque to 50 in-lb (5.6 N•m). Install four screws
connecting clamshell halves. Torque to 9 in-lb
(1.0 N•m).
ti19862a
7. Install pump module to drive module. See Pump
Module/Drive Module, page 31.
Repair
ti19880a
3A2308A