How to Spray
How to Spray
Switch Tip
™
Assembly
1.
Perform Pressure Relief Procedure,
page 11.
2.
Engage trigger lock. Insert Switch Tip.
Insert seat and OneSeal™.
3.
Insert Switch Tip and face forward.
ti13024a
4.
Screw assembly onto gun. Tighten.
14
and Guard
ti13023a
ti2710a
How to Adjust the Spray
Pattern
1.
To adjust the spray pattern direction,
relieve pressure. Loosen the tip guard
retaining nut (B). Turn the tip guard/tip
groove horizontally (C) for a horizontal
pattern and vertically (A) for a vertical
pattern. Tighten the nut.
2.
The spray tip orifice and spray angle
determines the coverage and size of
pattern. When more coverage is
needed, use a larger spray tip rather
than increasing fluid pressure.
NOTICE
Openings in the tip guard reduce paint
buildup on the guard while spraying.
Damage to the sharp edges of the
openings causes paint to collect at that
area. Never hang the gun by the tip guard.
B
A
C
ti03968a
3A4401A