Switch Tip™ And Guard Assembly - Graco DH230 Operation, Parts

High-pressure spray is able to inject toxins
into the body and cause serious bodily
injury. Do not stop leaks with hand or rag.
11. Inspect for leaks. If leaks occur, turn
sprayer OFF immediately. Perform
Pressure Relief Procedure, page 13.
Tighten leaky fittings. Repeat Startup
procedure steps 2-8. If no leaks, con-
tinue to trigger gun until system is thor-
oughly flushed.
12. Place siphon tube in paint pail.
13. Trigger gun again into flushing fluid pail
until paint appears.
334558D
PAINT
ti5255a
FLUSH
Switch Tip ™
Assembly
1. Perform Pressure Relief Procedure,
page 13.
2. Engage gun trigger lock. Insert Switch
Tip. Insert seat and OneSeal™.
3. Insert Switch Tip and face forward.
ti13024a
4. Screw assembly onto gun. Tighten.
Startup
and Guard
ti13023a
ti2710a
21