JRC NCR-333 Instruction Manual page 91

a. ALARM HISTORY
This screen displays a history of alarms which occur while the power is on. It displays the alarm history from
the most recent one maximum 20 lines.
To return to the NAVTEX ALARM screen, press the lcLR] key or
~
key.
I&"·
!~~~~~~ 4 m!Y.f~~c~Y~nA
4.11/12/04 15:30 002 A
power supply error
5.02/11/04 02:31 001
v
antenna malfunction
6.02/11/04 02:19 001 A
antenna malfunction
7.23/09/04 22:15 001
v
antenna malfunction
8.23/09/04 22:15 002
v
power supply error
9.23/09/04 22:14 002 A
power supply error
._10. 23/09/04 22:13 001 A
IT
antenna malfunction
Proceudure
(:!!)XI
Fig.6-18 ALARM HISTORY screen
1) To display the next old result, press
the~
key.
(:!!)XI
- "l'"
mark is displayed on the bottom line when the alarm history screen is able to be scrolled downward.
".6. •
mark is
d~layed
on the top line when the alarm history screen is able to be scrolled upward.
- Press the
~ ~
key and scroll the viewing area.
The time of an alarm occurred and is restored is displayed when external GPS receiver is connected.
"--1-1--
--:--"is displayed when time is not able to be acquired. (External GPS receiver is not connected.)
The display of the alarm is described.
Alarm message: 001,
Y...
antenna malfunction
1 2 3
1: The alarm number (refer to the following table)
2: The alarm condition
->
"V'': Healthy status, "A": Alarm is occurring
3: Alarm's description text (refer to the following table)
The list of NAVTEX alarm
Alarm No. Alarm's description text The contents of unusual detection
004 Receiver malfunction Unusual detection at the RX
005 Buill in self test failure
Self diagnosis failure
006 General failure Unusual detection at the oower suoolv oart
051 Antenna malfunction Unusual detection of antenna cower suooly
052 Flash memorv error The data in a memorv is broken.
053
Rx unit modem error Unusual detection at the modem oart
054 Printer error External printer has malfunction
055 EXT SIO outout error Unusual detection at the "DISP" outout oort
056 Receiver 1 malfunction Unusual detection at the RX1
057 Receiver 2 malfunction Unusual detection at the RX2
058 Receiver 3 malfunction Unusual detection at the RX3
2) To print the NAVTEX alarms to the external printer, press the
B
key in order to display the sub screen.
Select the "[PRINT OUT]", and press the IENlj key. Printing is started.
[PRINT OUT]: Printing is started.
[CANCEL]: Diagnosis is canceled, and the sub screen is closed.
6-57