Manual Receiving Station Selection (Manual Mode Setting) - JRC NCR-333 Instruction Manual

1&.3.1.4 Manual receiving station selection (MANUAL MODE SETTING)
To display MANUAL MODE SETTING screen, select
(6.3.5).
.MANUAL MODE SETTING
Select the receiving station of each channel. There is no setup of NAVAREA.
IBXI
from RX STATION menu
Fig.6-8 The receiving station selection screen (Manual mode setting)
The items of the receiving station selection screen (manual mode) are as follows;
-FREQUENCY: Select the channel (RX1 (518k), RX2 (490k), RX3 (4209.5k)).
- D
SELECT ALL: Select all the stations from A to
Z.
I:
A message is received.
O:
A message is not received.
- Receiving station A-
Z:
Select receiving stations from A to
Z
When this screen is displayed, the receiving station of RX1 is displayed first.
I
a.
Select
receiving stations
Start with selection of "FREQUENCY".
Carry out the procedure from section 3) to 5) of p.6-29 "a. Select receiving stations"
I
b. Cancel settings
Carry out "b. Cancel settingsn of p.6-30.
I
c. Set up the next channel
Carry out the procedure from section 1) to 3) of p.6-30 "c. Set up the next channel (or NAVAREA)".
I
d. Save
(or
Clear) settings
Carry out the procedure from section 1) to 4) of p.6-31 "d. Save (or Clear) settings".
6-32