JRC NCR-333 Instruction Manual page 55

I
g. Output massages from an external port
Output one message
The external serial port outputs the selected message's
data from DATA OUT port.
Procedures
1) Move cursor to the message to output.
2) Press the
8
key. The sub screen appears.
3) Select the MPORT MENu·. and the IENlj key.
4) Select the "[SEL-DATA oun· or "[SEL-DISP oun" in
the sub screen of "PORT MENU".
-Select an item in the same procedure as "f. Output the message from an external port- 3)" (p.6-12)
after the above procedure.
Output messages at the same time
The messages with the check mark can be output at the
same time.
Procedures
1) Continued from Procedure 5) of "c. Put a check mark.R.
(The sub screen is displayed.)
2) Select the MPORT MENu·, and the IENlj key.
3) Select re TfCHK-DATA oun· or "CHK-DISP OUT",
and the EN key.
To clear to all check marks, select "[RESET CHECK]"
and press the
~
key.
- CHK-DATA OUT: Message data outgoing from
ECDIS or INS port.
- CHK-DISP OUT: Message data outgoing from DISP port.
(Notes
I
-Select an item in the same procedure as Mf. Output the message from an external port- 3)" (p.6-12)
after the above procedure.
6-21