JRC NCR-333 Instruction Manual page 54

Print the lnfonnatlon on equipment
The list of stored messages and the setting status can be printed.
Procedures
1) Press the
8
key. The sub screen appears.
2) Select the ·PRINT MENU", and press the lEN] key.
3) Select the ·[LISTr or "[STATusr. and press the IENTj key.
[usn: The list of stored messages is printed.
PRINT MENU*
[SELECT MSG]
[CHECK MSG]
11!~1•1
[STATUS]
BATCH PRINT
[STATUS]: The setting status is printed. The contents of "6.3.5.3 Setting status of the NAVTEX
receiver'' are printed.
4) Printing starts. After printing is completed, close the sub screen.
Print massages at the same time
The stored messages can be printed at the same time according to
type, station and channel.
Procedures
1) Press the
8
key. The sub screen appears.
2) Select the ·PRINT MENU", and the IENTj key.
3) Select the ·sATCH PRINT", and press the IENTj key.
The sub screen of "BATCH PRINT MENu· appears.
4) Select the following message type for printing.
The "SELECT MSG" can select the message printing by the
receiving channel, receiving station, message type.
[ALL STORED MSG]: All stored messages are printed.
[ALL SAVE MSG]: All saved messages are printed.
SELECT MSG: The messages of the conditions
PRINT MENU*
[SELECT MSG]
[CHECK MSG]
[LIST]
[STATUS]
*BATCH PRINT MENU*
lt;'11a-J(tli~3•Wcf'."iCJI
[ALL SAVE MSG]
*BATCH PRINT MENU*
A-- SELECT MSG --
ttJ:rJm!31:
4209. 5
STATION:A
MSG TYP:L
selected from the following three items are printed.
-CHANNEL:
-STATION:
-MSGTYP:
The receiving channel is selected from '518kHz', '490kHz', '4209.5kHz' or 'ALL'.
The receiving station is selected from 'A' to 'Z', or 'ALL'.
The message type is selected from 'A' to 'Z', or 'ALL'.
5) To start printing, select item and press the IENTj key.
•ARE YOU SURE?• is displayed on the sub screen, if the IENTj key is pressed after selecting "[ALL
STORED MSG]" or •[ALL SAVE MSGr.
When in ·sELECT MSG", ·ARE YOU SURE?" is displayed on the sub screen, if the IENTj key is pressed
after selecting "MSG
rvp•.
[Notes
1
6-20
-Select an item in the same procedure as "e. Print the message-
ar
(p.6-11) after the above
procedure.