JRC NCR-333 Instruction Manual page 69

I
b. cancel settings
When the~ IMENUV IDISPV IUSERj key is pressed while setting up "a. Edit the receiving station name·, the
information screen (the sub screen) as shown in the following figure is displayed.
Select "OK" or "CANCEL".
OK: Canceling the edit the receiving station name settings, and the screen changes according
to the pressed key.
CANCEL: The information screen is closed. Continue the edit the receiving station name settings.
rmxr
EUinil
I
c.
Set up the next channel (or NAVAREA)
After a setup of a channel (or NAVAREA) finishes, the next channel (or NAVAREA) can be set up
continuously.
Procedures
1) Press the
[!] ~ ~ ~
key for selecting
Cursor moves to the right side of R:"
FREQUENC
(or
IUAf/4;1#~).
and press the IEN1j key.
2) Press the
[!] ~
key and select the number of NAVAREA.
And then, press the IEN1j key.
3) Select a receiving station in the same procedures as •a. Edit the receiving station name·.
6-35