General; Outlines; Features - JRC NCR-333 Instruction Manual

1. GENERAL
1.1 Outlines
The NAVTEX NCR-333 function receives and displays the various types of information broadcast
at frequencies of 518kHz, 490kHz and 4209.5 kHz, such as: navigational warning, meteorological
warning, search and rescue information, and other types of information. NCR-333 also provides
the function that selects information type and coast station for intended uses.
1.2 Features
e
Receiving NAVTEX broadcasts
NCR-333 receives NAVTEX broadcasts automatically on 518 kHz, 490 kHz, and 4209.5 kHz.
e
Large screen allows comfortable visibility
NCR-333 has a 5. 7 -inch LCD screen display with clear visibility.
It also provides three different character sizes of display, and can be selected at your convenience.
e
Message saving function
NCR-333 can store up to 200 message identification codes for 70 hours. Moreover, the stored
message of each channel can be saved up to 50 messages permanently.
e
Automatically receiving station setting function
NCR-333 can select receiving stations automatically on GPS position data is valid.
e
Permanent storage of data settings
NCR-333 can set and store the message type and seashore station that receive to internal memory.
The data, therefore, does not need to be re-set, even after power has been turned off.
e
Dual voltage supply input
NCR-333 can be used on wither 24 Voc or 12 Voc vessels.
e
Self-diagnosis Function
NCR-333 has automatic self-diagnosis function. This function allows easy maintenance and high
system reliability.
e
Connection to external equipment
NCR-333 can be used with the JRC Total Navigator (ECDIS) and external serial printers.
1-1