Using The External Sound Control - Panasonic RZ-S500W Operating Instructions Manual

Using the external sound control

The external sound control function switches between noise cancelling ([RZ-S500W] only), ambient sound and
off. The sound quality is set so that it is optimised for each mode.
1
While wearing the earphones, touch and hold the touch sensor (R) for about 2 seconds.
• The mode is switched each time you touch and hold the touch sensor. (A guidance message will notify you of the
mode you switched to.)
[RZ-S500W]
Noise cancelling
• The default level setting is "Noise cancelling".
[RZ-S300W]
Ambient sound
• The default level setting is "OFF".
2
Adjust the volume of the playback device.
∫ Noise cancelling ([RZ-S500W] only)
Reduces the sounds (noise) you can hear from outside.
• While using the noise cancelling function, a very small amount of noise which is generated from the circuit that
reduces noise may be heard, but this is normal and not indicative of any trouble. (This very-low-level noise may be
heard in quiet places or in the blank parts between tracks.)
∫ Ambient sound
You can hear ambient sound through the microphones embedded in the earphones while enjoying music.
Operation
OFF
18
Ambient sound
OFF